The OBD Blocker blocks unauthorised communication through the OBD port to your customer’s vehicle. This helps prevent key reprogramming or other unauthorised activities.
How is it installed? The OBD Blocker comes as a matching pair. A small tag which is attached to your key ring for easy access, and a module which is firmly connected to the existing OBD connector in the car.
How does it work?
Think of the Blocker as a switch. Without the matching tag the switch is off, so blocking unauthorised access to your car. To enable access place the tab on the module and the switch will turn on.
Q. What’s stopping someone from just unplugging the device?
A. The OBD blocker is secured on to the original OBD lead using thick self-adhesive heat shrink.
Q. How much do we sell them for?
A. £250 +VAT fully fitted at a shop/garage location or £299 +VAT fully fitted at any mobile location.
Q. Can I sell them for more?
A. Yes, just not less (if you are found fitting these less than the agreed price we will stop supplying you and you will no longer be an approved installer.)
Q. How much does it cost?
A. The OBD blockers are £146.00+VAT the OBD leads are £21.00+VAT the replacement tags (10pk) are £39.00+VAT and spare heat shrink (5pk) is £26.00 + VAT
Q. How do I know which unit/cable to use?
A. Use the online application guide http://www.obdblocker.com/downloads/obd_blocker_apps.pdf
Q. How do I become an approved installer?
A. Email Richard@advanced-keys.co.uk so we can send you the application form for you to fill in a return. (A copy of your public liability will be required)
Q. What if someone loses their tags?
A. You can buy replacement tags (10pk £39.00+VAT) that can be programmed into the unit
Q. How long does it take to fit?
A. It should take no longer then 30 mins to fit
Q. What equipment do I need to fit the blocker?
A. you can find the tools on page 5 of the manual http://www.obdblocker.com/downloads/obd_blocker_manual.pdf
Q. Can the blocker be fitted to 24V trucks?
A. No the blocker is 12V
Q. Where can I buy the blocker?
A. You can register on http://advanced-keys.co.uk/ and once you are an approved installer just place orders online
Q. Is there a manual?
A. Yes it can be found online http://www.obdblocker.com/downloads/obd_blocker_manual.pdf
Q. How does the public know I am an approved installer?
A. All approved installers are listed on http://www.obdblocker.com/installers.php where the public will be able to search for their local installer
Advanced Keys Limited
Tel: 0121 355 8510
Mob: 07468 698272